Five Easy Steps to Creating a No Sew Fleece Blanket




Materials Needed
2 ½ Yards Print Fleece
2 ½ Yards Solid Matching Fleece
Sharp Scissors

Step 1: Line Up the Two Fabrics

Choose a print and a matching solid fleece. Lay the two pieces of fleece out so that the most appealing side of each fleece is on the outside (which will become the outside of the blanket when completed).

Step 2: Trim to the Same Size

 Trim the two pieces of fabric so they are the same size.

Step 3: Cutting the Corners

Using a ruler, cut out a 4 by 4 inch square from each of the four corners.

Step 4: Cut the Fringe

Starting at the corners and working your way all around the blanket, use a ruler and cut slits around the edges of the fabric that measure 4 inches deep and 1 inch wide. Make sure to cut through both layers of fleece at one time. The slits being cut in this step are known as the "fringe".

Step 5: Tie the Knots

Cutting through both layers of fleece in Step 5 will make the fringe be in pairs. Knot each pair in an overhand knot (keep the two pieces of fleece together and wrap them around your finger forming a loop. Then pass the ends through the loop you made, pulling tight close to the actual blanket). Finish knotting each of the pairs all the way around and your blanket is finished. 



    • Sensors Contest

      Sensors Contest
    • Beauty Tips Contest

      Beauty Tips Contest
    • Stone Concrete and Cement Contest

      Stone Concrete and Cement Contest

    4 Discussions


    Question 7 months ago

    How big will this size be?


    3 years ago

    Thank you for easy-to-follow instructions and a great idea!


    8 years ago on Introduction

    these blankets are very warm, the only problem I have with them is they are to small, Im thinking about using 2 queen size fleece blankets