Fleece Body Pillow Covers : 9 Steps

Items Needed for this progress

1.) Scissors
2.) (1 + 1/2) yards of solid fleece
3.) (1+ 1/2 ) yards of print or pattern fleece
4.) (2) body pillows

Step 1: Step 1

Lay solid fabric down. Then printed fleece on top of it.

Step 2: Step 2

Mke sure the solid fleece and print fleece are even all the way around.

Step 3: Step 3

Cut off excess material along the edges. (Notice white material)

Step 4: Step 4

Lay material flat smoothing any wrinkles. Lay pillows 5 inches from the side of the fleece. Cut down center.
( Note: These supplies make 2 body pillows, so leave enough room for 2

Step 5: Step 5

Take half of the fleece and 1 of the body pillows and set it aside. Cut 5"x5" squares ouf of all 4 corners of the fleece.

Step 6: Step 6

Start in any corner and cut 1 inch wide and 5 inch thick strips in fleece all the way around.

Step 7: Step 7

Start in any corner and tie the bottom solid strip to the print strip forming a double knot. Do this along one side. Then place the pillow inside and continue to tie the strips all the way around.