Folding Knex Knife I Made.(Credit to Dutchwarlord)

About: ╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗ ║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ ╠╗║╚╝║║╠╗║╚╣║║║║║═╣ ╚═╩══╩═╩═╩═╩╝╚╩═╩═╝ Because I like fish! :D

Intro: Folding Knex Knife I Made.(Credit to Dutchwarlord)

Hey, this is my folding knife.
Please rate it, and let me know if there are some things i need to change.
Thanks and please subscribe.=]

Step 1: Piece Count.

Here is a list with a piece count.
There is also a piece count with a photo of all the parts.

Rods:

Green=14.
White=17.
Blue=0
Yellow=0
Red=1
Grey=1

Connectors:

Grey(1 slot)=25
Grey(2 slots)=1
Red=5
Green=0
Yellow=12
Orange=1
White=0

Other:

Tan clip=16
Blue clip=7
bBue ring=12
Y-connector=10
Ball sockets:8
(If you dont got ball sockets, you can remove 8 Y-connectors and just build it without them.)

Step 2: The Blade.

Step 3: The Handle.

Step 4: Connecting.

This is a step that shows you how to connect it.
I think that wouldnt be too hard.=]

Step 5: Finishing It Up.

This is not really needed, but it looks better and its more comfortable for your hand.

Step 6: Done!Have Fun!

Maybe make some more or use it as a bayonet.
If you want it to be a bayonet, then change the two red connectors at the end of the handle to yellows.
You also need to change a blue on the blade by a grey connector.

Share

    Recommendations

    • Audio Contest 2018

      Audio Contest 2018
    • Furniture Contest 2018

      Furniture Contest 2018
    • Metalworking Contest

      Metalworking Contest

    22 Discussions

    0
    None
    JaymzFlipper

    7 years ago on Step 3

    Actually, as long as you pay close attention to the pictures, this is very easy to build! I just finished and it took me only twenty minutes... Its a very good knife and I would recommend this to anyone looking to complete a knife that has some sort of strength towards it.... NICE :DDPPDD

    5 replies

    I still have this knex knife, i have had it for nearly 2 months now. Normally, I would scrap anything I have built within a week if it is boring or is not worth the time it took to build, but this knife works very well, great job!

    Just to let you know. It has been 4 months now and this knife still works fine. Just goes to show how well it really does work.

    0
    None
    FrozenStar

    8 years ago on Introduction

    Looking at its size i would say it would be better to just be a fixed blade but it still looks quite nice.

    0
    None
    ponddust1

    9 years ago on Step 5

    could you make it so it dosn,t fold or make a lock or something.