Create a simple and easy business card stand using 3 binder clips.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Find a Medium, Small, and Extra Small Binder Clip
From left to right: Medium binder clip, Small binder clip, Extra Small binder clip
Step 2: Remove Silver Handles From the Small Binder Clip
Pinch in where there handles meet the black clip to remove them.
Step 3: Place Small Binder Clip Inside Medium Binder Clip
Using the handles on the medium binder clip, open it slowly and insert the small binder clip so that the flat edge of the small binder clip is closest to the opening in the medium binder clip.
Step 4: Remove Silver Handles From the Medium Binder Clip
Pinch the silver handle closest to the black clip to remove.
Step 5: Replace a Handle on the Extra Small Binder Clip With a Handle From the Small Binder Clip
Remove one of the handles from the Extra Small Binder clip. Then, using one of the handles you removed earlier from the Small Binder Clip, attach it to the Extra Small Binder clip.
Step 6: Clip Extra Small Binder Clip to the Medium Binder Clip
Attach the extra small binder clip to the center lip of the medium binder clip with the longer handle towards the bottom (flat edge) of the medium binder clip.
Then remove the smaller handle from the extra small binder clip. This will function as a resistance to keep the stand from tipping over.
Step 7: Now Add Your Business Cards
Grab a hand full of business cards and add them to your new stand.