Introduction: Free, Strong Drawer Dividers
What a mess.
Step 1: Tools and Materials
1. Measuring tape
3. Circular saw
4. Chop saw is handy
5. Chisel if needed
6. Hammer if needed
7. Paint if you want to go all out
Step 2: You Start With a Junk Drawer
We all have these drawers. Mine happens to be in the garage.
Step 3: Take a Tossed Pallet
Sorry I never took a picture of the pallet. I didn't remove the nails or anything. Just took a circular saw and cut out the pallet strips which were 3 inch wide, 1/2 inch plywood. After measuring the drawer, I cut the wood to the proper size. With a chop saw, I cut the dadoos into the wood
Step 4: Put Them Together
Got lucky for me, nice tight fit
Step 5: Put in Drawer
Again, got lucky, nice tight fit
Step 6: Re-organize You Stuff
Drawer looks better now, doesn't it?