Fringe Bonnet From Old Clothes

Introduction: Fringe Bonnet From Old Clothes

About: Hi, call me Spring. I'll be sharing some things that can either be helpful or not. Nobody's perfect, so bare with the crafts I do. Thanks!

Materials:

Old clothes
Needle and thread/Sewing machine
Scissors
Tailor's chalk (Optional)

Start off by measuring the size of your head. Get the width and the height of your desire, leave an inch for sewing. 
If you have a Tailor's chalk, mark the edges where you'll cut it. 

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1:

And then, it's time for cutting! :)

Step 2: After Cutting

You'll get a rectangular shaped cloth, then fold it once. Get an inch and get ready to sew both sides together.

Step 3: SEW IT UP!

Sew them together. You can use a sewing machine if you're lucky.
For those who are using a thread and needle with their bare hands, first is to be careful. Wear a thimble if you want to.
You can sew them up however you want, even those with poor sewing skills can make a good one. All you have to do is sew them together. Make sure that you'll sew inside the cloth so the sewn part won't be visible. 

Step 4: The Fringe.

Mark 2 inch on the top of your bonnet for the fringe. Cut them freely, or 1 inch per cut.

Step 5: Closing the Top.

Now cut 1 inch from the sleeve. Cut it in between to and tie it below the fringe of the bonnet and then you're done!

Step 6: Finished Product.

There ya go! If my instructions are a bit hard to comprehend, you can ask me directly through twitter! Thank you! (That's my little brother by the way.)

Maker Moms Contest

Participated in the
Maker Moms Contest

Be the First to Share

    Recommendations

    • Heart Contest

      Heart Contest
    • Fiber Arts Contest

      Fiber Arts Contest
    • Paper Contest

      Paper Contest

    2 Discussions

    0
    canucksgirl
    canucksgirl

    7 years ago on Introduction

    Nice job. :-)

    You may get more views for your Instructable if you make the first "main image" a photo of your completed bonnet.