Introduction: Functional Kit Mercy Gun of Overwatch
Caduceus Blaster is a secondary weapon supporting Mercy heroine of the game Overwatch developer Blizzard Entertainment.
manual has been compiled to give a model nicely painted and then fold ..
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Documentation
Get a nice and useful data for 3D model
Step 2: 3D Modeling
First you need to create a 3D model itself Blaster suitable for 3D printing.
This 3D model was prepared using Cinema 4D. 3D modeling weapons and to go nicely folded and paint takes about 22 hours of patient work, quality music and one of two energy drinks.
Step 3: 3D Printing
When we model and prepare it for 3D printing
If you can not be modeled as a 3D model can be downloaded here
data version n.1. still needs to be lightly sanded
Step 4: Manual Processing of 3D Printing
3D printing is to be cleaned, remove the props and excessive portions
Step 5: Grinding and Polishing
using sealants and paints and putty outgrow 3D printing errors
Step 6: Painting
an inked us just ordinary paints and sprays
According to the draft of the paint the
Step 7: Assemlby
The composition is already tranquility see video.
Attention: components need to adhere to each other ..
if you're interested Mercy gun ready to write email@example.com
further guidance will Roadhog Scrap Gun
if you are interested in any toy Write very happy to prepare guidance