Futuristic Martian Tree Sculpture Made With Aluminium Poured in to Orbeez

628

4

3

About: Crazy stuff and instructables for normal live and survive

I end up with a Mars bonsai tree sculpture made by pouring molten aluminium in a bucket full of Orbeez.

This statue is very easy and you can make it if you have a foundry.

Step 1: Pour a Bag of Orbeez on a Bucket of Water

Pour a bag of orbeez on a bucket of water

Step 2: Wait 3 Hours and Give Time the Orbeez to Grow

Wait 3 hours and give time the Orbeez to grow

Step 3: Melt Some Aluminium on the Foundry

Melt some aluminium on the foundry

Step 4: Pour the Molten Aluminium in to the Bucket

Pour the molten aluminium in to the bucket

Step 5: Remove the Aluminium From the Bucket

Remove the aluminium from the bucket and remove the orbeez

Step 6: Make a Basement of About 12x12 Cm

Make a basement of about 12x12 cm, draw it on a piece of wood

Step 7: Saw the Basement

Saw the basement

Step 8: Sand the Basement With 300

Sand the basement with 300 sandpaper

Step 9: Make a Hole in the Basement

Make a hole in the basement and also on the aluminium statue

Step 10: Varnish the Basement

Varnish the basement

Step 11: Use an Screw to Hold the Statue

Use an screw to hold the statue on the basement

Share

    Recommendations

    • Classroom Science Contest

      Classroom Science Contest
    • Games Contest

      Games Contest
    • Stone Concrete and Cement Contest

      Stone Concrete and Cement Contest

    3 Discussions

    0
    None
    johnip4liquidhandwash

    Reply 4 months ago

    Actually it’s not dangerous if the steam has a way to escape.

    This reminds me of the Anthill sculpture YT channel, Great Project