Gift Giving Mandalorian Decal

596

5

Introduction: Gift Giving Mandalorian Decal

About: Crafting tales about the things I make at my workbench 🛠🧰

On the seventh day of Christmas my true love gave to me - a car decal of a gift giving Mandalorian!

After not getting enough with the Baby Yoda ornament, I wanted to make another project inspired by The Mandalorian, and came up with a decal for my car to show off some Star Wars love and be festive at the same time.

Here's how I put this project together

Supplies:

Supplies I used: (with affiliate links)

Vinyl - https://amzn.to/2rwGlje
Transfer paper - https://amzn.to/2Ed37iQ

Tools I used:
Inkscape - www.inkscape.org
Brother plotter - https://amzn.to/36qkFnm
Weeding hook - https://amzn.to/38AGORM
Squeegee - https://amzn.to/2YIvvTb

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Trace the Image

I started by taking a screen shot from the iconic moment that unleashed Baby Yoda onto the world. I copied the image into Inkscape and used the pen tool to trace out the Mandalorian and Baby Yoda's pod. Switching to the adjust tool I adjusted and curved the lines to match the picture.

Still using the adjust tool, I altered the Mandalorian's outstretched hand to make it look like he was holding something. I went onto the internet and found a generic picture of a Christmas present and copied it into Inkscape. Using the 'trace bitmap' functioned I created a bitmap, cleaned it up and scaled it to size.

Step 2: Cutting the Decal

I exported the drawing I made and brought it into my plotter software. Scaling the Mandalorian and Baby Yoda pod to 5" tall, I first cut the two figures out of white vinyl.

Step 3: Cutting the Presents

Wanting some contrast between the Mandalorian and the present, I decided to cut the present out of red vinyl. I cut out 3 different sizes to play around with and see which size would look best once everything was cut out.

Step 4: Picking a Present

I took some transfer paper and stuck it to the white vinyl cutouts. I pulled the back off, then hovered the cutouts over the different sized presents. I ended up choosing the middle present, so removed the other two presents then aligned the Mandalorians hand to the proper placement over the present and stuck it to the transfer paper.

Step 5: Putting on the Decal

I cleaned the part of my window where I wanted to place the decal. I carefully placed the decal and transfer paper on the window, trying not to get any bubbles due to the curvature of the window. After squeegeeing the decal down, I removed the transfer paper.

Step 6: Drive in Festive Mandalorian Style

Now that the decal is on, I can drive my car around in festive Mandalorian style!

Step 7: Watch the Video!

Now you know how to put it together, watch the video on how it was all done!

I have more geeky projects you can check out here on Instructables, so be sure to follow me for when I put out new Instructables

AND you can watch more of my project videos here

AND you can also follow me on Instagram @onceuponaworkbench

Be the First to Share

    Recommendations

    • Magnets Challenge

      Magnets Challenge
    • Snow Challenge

      Snow Challenge
    • Wearables Contest

      Wearables Contest

    Discussions