Amplifier IPod Speaker

Introduction: Amplifier IPod Speaker

In this Instructable, I will be showing you how to use your guitar and amp as a speaker.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: What You Will Need

Here is what you will need:
- An iPod
- iPod ear things
- Electric Guitar Amp
- Electric Guitar

Step 2: Step 1

First, you will need to turn your amp on.

Step 3: Step 2

Make sure your guitar is plugged into the amp

Step 4: Step 3

Put you earbuds on top of your pickups, making sure the strings are holding them in place.

Step 5: Step 5

Turn on your iPod and pick a song

Step 6: Finished!

Congratulations! You can now use your amp as a iPod speaker without having to buy confusing cords!

Be the First to Share

    Recommendations

    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Raspberry Pi Contest 2020

      Raspberry Pi Contest 2020
    • Wearables Contest

      Wearables Contest

    6 Discussions

    0
    admin
    admin

    10 years ago

    This is a great Instructable, but you need to add a main image of the final project to the intro step. Please do that and leave me a message when you have so that we can publish your work. Thanks!

    0
    101lenny101
    101lenny101

    Reply 10 years ago

    OK, I have the image

    0
    cheesekake22
    cheesekake22

    10 years ago on Step 5

    you sir are a genius. this works perfectly, the sound quality is great (if u set the amp to clean.) Thank you so much!

    0
    101lenny101
    101lenny101

    Reply 9 years ago on Step 5

    Anytime! I hope to be putting more stuff up soon!

    or you could pick up a male-male 1/8" audio jack and a 1/8" to 1/4" converter from radioshack for about 5 bucks and not lose 90% of your sound quality.... guh

    0
    101lenny101
    101lenny101

    Reply 10 years ago on Step 6

    Yeah, your way will work too, but I'm broke...