Coming MOTHER'S DAY.
Do you have any gift idea ? if answer is " NO" , do you want to give to her a gift ?
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: How to Make This Project ?
Check the video above to see it working....
Step 2: Equipment Lists
The materials needed are:
A CNC Laser Draw or a mother's picture
3D Printable Parts for boxing
RGB stribe Led
BD 135 Transistor
That is it :)
Step 3: CNC Laser Drawing
If you have a CNC Laser Engraver, you can draw a picture of your mother. In this picture you can see some samples.
Step 4: Electronic Circuits
And next step about circuit.
as you can see on pics you have to soldering arduino nano,rgb stribe led, transistor and resistor. Very simple circuit. We are using pinout 12 on arduino.
Step 5: Boxing
We are using 3D Pirnter for boxing. But if you dont have a 3d printer, you can use different boxes. Doesnt matter.
In this pictures, you can see how to do this.
Step 6: Arduino Code for Heartbeat Lamp and STL File for 3D Printer
You can find arduino code for heartbeat and also find stl file for 3d printer