HOW TO MAKE ADVANCED LASER PROJECTOR

5,506

52

3

About: Welcome to the Delta Hack Channel! Here you will find interesting and awesome life hacks and tricks! Subscribe! ;)

Hello there!

Today we make for you very nice and awesome laser projector from lasers, motors and mirrors. If you like our video, please subscribe! :)

For making this awesome projector you need:

  • Cardboard
  • 3 Lasers
  • 5 Electric Motors 6V
  • 5 Mirrors
  • Ice Cream Sticks
  • Wires
  • Contacts
  • Hot Glue
  • Batteries
  • Transistors
  • Variable Resistors
  • Voltage Regulators
  • Power Slot
  • Buttons
  • Power Supply 6V

First of all look the video instruction ->

Let's go!

Step 1: Mirrors

Make a platform of ice cream sticks.

Install the electric motor and glue the mirror.

Step 2: Speed Regulator

It is necessary to have a variable resistor of 0-4.7 kΩ and a transistor.

Solder the transistor to the resistor as in the picture. To the middle leg we connect plus from a food. To the left leg, we attach a plus to the electric motor.

Step 3: Lasers

We connect the lasers to the external power supply and the switch.

In this way, the laser can be turned on from the outside.

Step 4: Install

Install mirrors and lasers on the platform.

I made such a scheme. But you can set it on your own.

Step 5: Power Supply

Connect power.

Plus goes to the middle leg of the resistor. We take the minus from the electric motors.

Step 6: Assemble the Box

I cut out my hole for each mirror regulator.

Also the switch of each laser.

Step 7: Enjoy

Share

    Recommendations

    • Big and Small Contest

      Big and Small Contest
    • Toys Contest

      Toys Contest
    • Make it Glow Contest 2018

      Make it Glow Contest 2018

    3 Discussions

    0
    None
    BS16

    6 weeks ago

    Nice project but horribly confusing instructions. You need a schematic for staters. You need dimensions for the laser pointer and motor holders. You need to give details on the positioning of the mirrors and motors aside from the diagram you produced. A theroy of operation would be nice.

    0
    None
    PatrickM392

    1 year ago

    I made a similar device a couple years ago using an arduino and a 4 channel motor control shield. The arduino generated random motor speeds to generate random patterns. If you time the switching to music, it makes a really cool show.

    0
    None
    deonjwessels

    1 year ago

    Great Instructable. Could you please add circuit diagram.