HOW TO MAKE LIGHT FROM LEAD

Introduction: HOW TO MAKE LIGHT FROM LEAD

THIS VIDEO IS ABOUT LIGHT FROM LEAD....I DID THIS DURING MY 11TH GRADE...

Share

    Recommendations

    • Fix It! Contest

      Fix It! Contest
    • Tiny Home Contest

      Tiny Home Contest
    • Creative Misuse Contest

      Creative Misuse Contest

    4 Discussions

    i used 1.5v batteries... so total of 16 batteries and so the out put is 1.5 x 16

    You should explain a bit in your text. Shorting out a pencil graphite "lead" with a bunch of batteries to make it glow... It would take some serious power to make a lead ingot light up.

    1 reply

    its easy...just for fun try a lead from a micro-tip pencil...

    1.connect the lead with aligator clips on both sides

    2.connect the clip's end to the battery output area...that should be the negative and positive terminal from the 16 batteries...

    3.now ready to go ....the lead will start glowing...and if u want to make a decoration out of it u can try HB pencil lead by scraping out the wood...the power to ignite such lead is possible only with adaptor or car battery.....

    4..fun...:)


    5.thanks for the comment...:)