HOW TO MAKE YOUR OWN IPOD HOODIES {NEW AND IMPROVED!}

Introduction: HOW TO MAKE YOUR OWN IPOD HOODIES {NEW AND IMPROVED!}

how to make your own ipod hoodies NOW BIGGER AND BETTER
this instructable is based around my ipod touch but your can still make one for any ipod.

please see my first ipod hoodies instructable too https://www.instructables.com/id/MAKE-YOUR-OWN-IPOD-HOODIES--P/

what you need:
fabric of choice
sewing machine (optional)
zipper

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Cut Out Pattern

trace around your ipod and cut the fabric so that the two sides fold to the exact middle of your ipod
and cut out a flap on the bottom about 3/4 of an inch long and a square shape thing for the hood
i hemmed the fabric i was using because i tended to fray
just sew along the edge to do this

Step 2: Start Sewing!

ok now just start sewing the zipper on
sew the zipper so that the thing you pull is on the top
you may have to shorten the zipper to do this see my other instructable to do this.https://www.instructables.com/id/SUZKRPNFGIAG9P9/

then sew the flap on over the end of the zipper i just did this by hand sewing
and finnaly sew the hood together
sew the top of the hood together and sew the flaps on ether side of the zipper

Step 3: Decoration

i put a skullcandy thing on this hoodie
i did this by getting a sheet of no sew adhesive from my local craft store and putting it on the back with a piece of white fabric on the back

you can do what ever you want embroider it or whatever.

Participated in the
Converse Back to School in Style Contest

Participated in the
SINGER Kids Crafts Contest

Be the First to Share

    Recommendations

    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Raspberry Pi Contest 2020

      Raspberry Pi Contest 2020
    • Wearables Contest

      Wearables Contest

    2 Discussions