Hacking Your 2019 Maker Faire Seoul Badge

In Maker Faire Seoul 2019, skiiiD giveaway Arduino Nano and Neopixel! Instruction for how to use NeoPixel and Arduino with skiiiD.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Materials

Badge x 1

CR2032 Coin Cell Battery X2

Coin Cell Battery Holder X1

Neopixel Strip X1

Arduino Nano X1

Mini Bread Board X1

Step 2: Put CR2032 Batteries Securely

Let's put CR2032 Coin Batteries to Battery holder.

Step 3: Put Battery Holder Cable to Bread Board

Prepare Arduino Nano and Bread Board.

Then, Put Battery holder's + cable to VIN

and - cable to GND

Step 4: Neopixel

Figure out right port of Neopixel

Step 5: Check Out Pin Recommendation From SkiiiD

Click 'New' Button.

Step 6:

Then select the board prepared. In our case, we use Arduino Nano(old bootloader).

Step 7:

Click + button on the right-hand side.

Step 8:

Search or select Neopixel SW2812.

Step 9:

When clicking the component can figure out which pin is recommended.

*you can configure it

GND: GND

DIN : 3

4-7VDC: 5V

Step 10:

According to Pin indication, put Neopixel wires on the breadboard

Step 11: Assemble

Stick all the materials.

Step 12: Coding

Let's back to skiiiD Editor.

Type below code or use auto-complete function for coding.

NeoPixelWS28120.randomBlinking();

Step 13:

Click Upload button on the left upper side.

Step 14: Done!

Step 15: Contact and Feedback

Check out the video for details.

If you have any questions, please contact us freely.

Email: marketing@skiiid.io

Twitter: https://twitter.com/skiiiD_official

Facebook: https://www.facebook.com/enterphin/

Be the First to Share

    Recommendations

    • Instrument Contest

      Instrument Contest
    • Make it Glow Contest

      Make it Glow Contest
    • STEM Contest

      STEM Contest

    Discussions