Intro: Hand Flash
Maker name: Naveen
Location: Banjarapalya E4D Makerspace
Step 1: Glows
Take a glows which type you need.
Step 2: Wire and LED
Take a wire and 6 white led and fix it to the wire as shown in the image.
Step 3: Coin Cell
Take one coin cell
Step 4: Stick Tape
Use paper tape to stick led s to the Glows as shown in the image.
Step 5: Stick Wire to Glous
When you finished Fixing then Connect all things at last cut the plus wire and stick one wire to your thumb
and another wire to tour middle finger and when you touch the two wire the led will blink.