Intro: Hardware Bracelet
Here is a really cool and easy bracelet to make with just a few pieces just laying around the house.
Step 1: Supplies
Here is what is needed
A large nut
Step 2: Cut Pieces of Yarn
I cut 12 pieces of yarn about 12" long
I then split them into 6 strands on each side
Step 3: Connect Yarn to Nut
I connected the yarn to the nut by looping the string through nut and pulling taunt.
I then took the excess and braided the yarn together, tying off at the end.
Step 4: Finish Off
Finally I tied a loop to the end of my string and I was done with this cute little hardware bracelet.