Introduction: Harry Potter Printables Vol. 2
Hey, everyone. Here is the next volume of Harry Potter printables!
In this instructable, I'll be providing you with a compilation of some great Harry Potter printables. I also have a few tips and ideas to go along with them. Most of these are as easy as printing them and cutting them out. The download for the templates zip file is below (on desktop) or above (on mobile). The templates come in 8.5x11 inch size and A4 size. There are also some 11x17 size printables.
Cutting Mat – Get it here
X-Acto Knife – Get it here
Metal Ruler – Get it here
Scissors – Get it here
Double-Sided Tape – Get it here
Glue Stick – Get it here
8.5x11 Paper – Get it here
8.5x11 Card Stock – Get it here
11x17 Paper – Get it here
Prisoner of Azkaban (Hardcover) – Get it here
Half-Blood Prince (Hardcover) – Get it here
Specialty Paper (Optional)
News Print – Get it here
Old Parchment – Get it here
You'll also need to download my free templates available below. I am not referring to the instructables PDF (which requires a paid subscription). You want to download the .zip file.
YOU MAY *NOT* USE THESE TEMPLATES FOR PROFIT
Step 1: Video Tutorial + Printing Instructions
Watch my video tutorial above or continue to the next step for written instructions.
- Dumbledore's Army Page - Regular Paper
- Hogwarts House Patches - Card Stock
- Lumos Nox Light Switch Covers - Card Stock
- Polyjuice Potion/Skele-Gro Page - Regular Paper
- Undesirable No. 1 - Regular Paper
- Daily Prophet - 11x17 Paper
- Marauder's Map Lite - 11x17 Paper or Regular Paper (for extra lite version)
- A History of Magic Dust Sleeve - 11x17 Paper or Regular Paper
- Advanced Potion Making - 11x17 Paper or Regular Paper
- Luna's Spectrespecs - Card Stock
Step 2: Instructions
Most of these are as easy as printing and cutting them out. The following tips/instructions are to help beyond that. Please see the video and/or photos for reference.
Hogwarts House Patches
Tape a safety pin to the back to pin them to your guests' shirts.
Lumos Nox Light Switch Covers
Use double sided tape to stick them to your light switch covers.
To make this look more weathered and old, fold creases along the fold lines. Rip one side off to make it look like it look like it was torn out of a book. Make small tears at the edge of the paper where the folds start, and then curl the edges of the tears a little bit. Wad the page into a ball, then open it up and flatten it out again.
Undesirable No. 1 Flyer
Print out a bunch of them and fill a wall with them. Save one to put inside the Daily Prophet.
The Daily Prophet
Put the Undesirable No. 1 flyer after the first page of the Prophet, then tri-fold the whole paper to make it look like a news paper.
Marauder's Map Lite
You'll need to fold the Marauder's Map and glue the middle piece into place. See the photos and/or video for more help.
Advanced Potion Making/History of Magic Book Sleeves
Cut out the Advanced Potion Making sleeve first, then line it up on top of the History of Magic template to find your cut lines. Advanced potion making was designed to fit the hardback version of the Half-Blood Prince, and the History of Magic sleeve was designed to fit the hardback version of the Prisoner of Azkaban.
After cutting out the template, hold one of the earpieces where it would wrap around your ear. Make a fold where the front of the glasses should start to make sure they will fit you. Make the same fold on the opposite earpiece. Use double-sided tape to tape them onto the glasses. Cut out a small hole in the middle of each "lens" of the glasses. Alternatively you could use a hole punch to make the holes. If you use scissors to cut the holes, round them out by pushing the mack end of a pen through the holes.
Step 3: You're Finished!
Congratulations, you're done!
Remember to recycle your scraps.
Post your ideas and creations in the comments below!
Remember, every Instructable I make I will be giving away my creations. Head over to my youtube page to learn how you can enter the random drawings.