Headphone Repair No Solder

Introduction: Headphone Repair No Solder

Hi! This is another installment in my headphone repair series. This tutorial shows how to replace the typical TRS 1/8 inch (3.5 mm) plugs, which are the headphone plugs most headsets use. However, I use a plug that requires NO SOLDERING! This makes repairing them a lot easier. Simply use the screws to secure the wires. Here is a link to the RadioShack website so you could purchase the plug:http://www.radioshack.com/1-8-mini-st...Any questions, please ask. I check my comments often. Thanks for watching!

Share

    Recommendations

    • Water Contest

      Water Contest
    • Fix It! Contest

      Fix It! Contest
    • Creative Misuse Contest

      Creative Misuse Contest

    Discussions