Introduction: Hedgehog Pumpkin (Lollipop Holder)
If, like me, you can't always get to the door in time for the Trick or Treaters, try this so they don't miss out.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: You Will Need ...
Electrical (stretchy) tape
and a drill with a bit that accommodates the size of a lollipop stick
or hammer and a nail
Step 2: Mark Pumpkin With Tape
Using the electrical tape, place regular, equally spaced stripes around the pumpkin
Step 3: Mark and Drill Holes
Mark out spots, at regular intervals, for the lollipops holes to be drilled.
Don't drill them too deep as you want the lollipops to stand proud of your pumpkin and will be easy for little hands to pull out.
If you don'd have a drill, you can use a hammer and nail
Step 4: Take Off Tape
Remove tape and give the pumpkin a wipe over
Step 5: Full With Lollipops
And that's as easy as
Have a safe and happy Halloween