This instructable will teach how to make a puppet out of a glove.
Inspired by NeilCicierega's "Button" off youtube
(If you don't no who that is look him up)
P.S. his puppet is better
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: The Materials
What you will need to make a puppet
-Picture (of hands,feet, and head)
-A sheet of thin card board (I used the piece off the back of a construction paper pad)
-Glue (Elmers stick glue)
-Hot Glue gun and glue sticks
-scissors or exato-knife
Step 2: Glue It
Spread the glue on the back of picture.Take the cardboard and put it on freshly glued peice of paper making sure that there are no bubbles or things of that sort.
if you want to glue only the parts of picture you need
Step 3: Cut It Out
-Scissors or exacto-knife
-Glued sheet o' stuff
Cut out the hands, feet, and head being caeful not to cut peices you don't want cut
P.S. at the end of this process you will have alot of scraps you can go ahead and throw those away
Step 4: HOT GLUE + Construction
HOT glue guns are very HOT if you burn yourself it's not my fault cause I told you so
-Hot glue gun and glue sticks
-stick glue (optional)
Take the pieces and arange them like this on the glove
-feet = thumb and pinkey
-hands =index and ring fingers
-head = middle finger
take the hot glue and place a small bead on a finger (of the glove) of your choosing (your gonna do this for all the fingers I'm just giving you some freedom) and place the coresponding pieces on it and apply pressure making sure your on the finger tip
Tip: put the glue stick in the finger your gluing and glue where it's flat on top
Step 5: Done
You made it. Now take it and your newly discovered knowledge into the world and make new and better ones or just keep the original and never make another one again.