Hornady Style Overall Length Gauge (OAL)

About: MSFN is "Makin Sumthin from Nuthin", I suggest you do the same! Basically I take inventory of what I have laying around that most likely cost me nothing, and building something useful and fully functional ou...

Video Above, Simply Click The Play Button :)

My Shop made version of the Hornady Lock-N-Load Overall Length Gauge for Use in Reloading Ammunition. The Entire Gauge Was Made from 5/8” Round Bar and 1” Aluminum Round Stock Cast In The Home Foundry and Machined On My Manual 12” Atlas Lathe. This Gauge Was Made For a .308 and .223 Caliber Rifle. It Is Used For Determining The Exact Bullet Seating Depth Using A Comparator, a Modified Bullet Casing and a Set of .001” or Better Calipers. In This version I Used a 5/16-24 Tap For The Modified Bullet Casings.

Visit My YouTube Channel: https://www.youtube.com/c/MakinSumthinFromNuthin

MSFN = Makin Sumthin From Nuthin

Share

    Recommendations

    • Tape Contest

      Tape Contest
    • Arduino Contest 2019

      Arduino Contest 2019
    • Gardening Contest

      Gardening Contest

    Discussions