How I Designed a 3D Printable Valentine Heart Gift Box Using Autodesk Fusion 360

Introduction: How I Designed a 3D Printable Valentine Heart Gift Box Using Autodesk Fusion 360

About: The more mistakes I make, the more knowledge I gain.

Valentines Day (my birthday by the way!) is near and I needed a custom sized yet simple two piece heart shaped gift box. So I quickly designed this heart shaped container using Autodesk Fusion 360, 3D printed it, and now my heart shaped gift box is ready to contain my gift to my Valentine.

I've included the "ready for 3D printing" files "Top.stl" and "Bottom.stl", and for those interested in the steps and methods I used to create the heart shaped gift box using Autodesk Fusion 360, I've included the file "Valentine Heart Box v1.f3d". This file, along with the attached video, should provide enough information for customization of the dimensions of the heart shaped gift box for your Valentine.

Designed using Autodesk Fusion 360, sliced using Cura 4.4.1, and 3D printed in PLA on an Ultimaker 3 Extended and an Ultimaker S5.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Be the First to Share

    Recommendations

    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Rope & String Speed Challenge

      Rope & String Speed Challenge
    • Wearables Contest

      Wearables Contest

    Discussions