This is my first instructable and it's just to show you how I made this phonebag for my new phone. It's very simple and easy but the detail I wanted for it was a window, so I can see at a glance the time and the notifications (upper bar in the screen).
As this is a one-evening craft, I just share with you so anyone can get inspired and make one for their own, with their own features!
Put in practice your projects and be original!
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Materials
Basically it's a piece of leather (or imitation) and a pad. The leather is from the back of a couch and the padding is actually from floor padding. Both recycled materials. And of course, needle, thread, scissors, ruller, cutter...
Step 2: Cut the Shape and Start Sewing
I cut the shape of the phone in the leather and in the pad and started sewing the upper border so I can work with both pieces as a whole.
Step 3: Sew to Close the Bag
Used needles to keep both layers jointed so I can start sewing following the outer border, starting from the bottom.
Step 4: Leave the Gap Open or Closed
At this point, I could have left the gap open so it's easy to take the phone out. But it was so weak that I had to close it and sew it to the end, because the phone would come out if I left the gap open and I want it slightly tight.
Step 5: Cut the Window
With the cutter (and something inside the bag so you don't cut on the other side of the leather) made the window so I can see the upper bar and the time.
Step 6: Sew the Window and It's Done!
The last step would be sewing the window so it has a pretty and defined finished.
Thanks for reading and hope you got inspired!