Introduction: How to Double LatticeYour Converse
Thread the shoelace through the first two eyelets like the picture.(make sure both ends of the shoelace are even.)
You then skip the next 2 eyelets, cross your shoelaces and thread them through the eyelets.
Next, take both ends of the shoelaces and thread them through the eyelets that you skipped.
Then with the right end of the shoelace, skip the next eyelet up and thread it through.
Now with the left shoelace, you do the same with the right, but you go under the shoelace coming out of the 3rd eyelet on the left. You then go over the right end of the shoelace .
Then with both shoelaces, you thread them down through the 3rd eyelets and pull out.
You then do the same thing as step 4 with the right shoelace.
You do the same with the left side, you have to thread the left shoelace over the shoelace coming out of the 4th eyelet and under the right shoelace
Than again thread both shoelaces down to the 4th eyelets and pull out.
Then finally with the right shoelace, you go under the shoelace going into the 5th eyelet and thread it into the 6th eyelet.
Finally with the left shoelace, you thread it over the shoelace coming into the 5th eyelet and under the right shoe lace and then your done!!!(sorry if the instructions don't make sense,it's my first post.)