Introduction: How to Make a Duct Tape Belt
This will tell you how to make a belt made of duct tape
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Gather Materials
You will need scissors, duct tape of choice, two d-rings, and a measuring tape. Also two chairs to stretch the duct tape across.
Step 2: Measure and Stretch
Measure how long you want the belt to be, and place the chairs at that distance from each other, putting duct tape across the backs of the chairs leaving a little extra down the back of each chair
Step 3: Fold the Tape
Now you will fold the tape hot dog style up to the backs of the chairs
Step 4: Close an End
Close one end of the length of tape
Step 5: Cut
Cut the other end of the tape at the fold about 3/4in to 1 in from the end
Step 6: Fold End
Now take your d-rings and place them in between the pieces of tape where you cut the belt, and wrap one side of the tape around the flat side of the rings, then the other
Step 7: Wear and Enjoy
Now go wear your new duct tape belt and enjoy