Introduction: How to Make a Popsicle Stick Switch Blade
So this is my first instructable and its gonna be about the popsicle stick switch blade. I'm gonna try to explain as good as I can.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Know How It Works
As you see in the picture,you can guess how it works(hopefully).
Step 2: Make Sure You Cut Your Sticks Right!
You'll need 3 sticks and on the first stick, you cut about an inch off and make the blade look like a blade.
Then, on the second one you want to cut about an inch again, and now take that inch and cut about an quarter of it.
Don't do anything on the last one
Step 3: Putting It All Together
I can't explain this part but if you look at the photos, you'll get the idea.
Step 4: Using It
If you cut the blade into a sharp end, you should be aware that this is counted as an weapon. So beware not to stab any living thing as it can hurt somebody.
Step 5: Finishing Touch
Once, you got it all assembled and working, you can decorate it! Draw on it,paint it and other cool stuff!
Step 6: Complete!
Your popsicle stick switch blade is now complete! I hope you enjoyed this instructable! :)