How to Make Camera Taser

3,871

57

2

Introduction: How to Make Camera Taser

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1:

Get a Disposable Camera and take the front off.

Step 2:

Pull out flash conductor.

Step 3:

Put AA battery in it and flip it over and press down on the two parallel wires to charge flash/taser.

Step 4:

Put Metal on both the wires and it will make sparks hold flash charge longer to make it a stronger zap.

Be the First to Share

    Recommendations

    • Backyard Contest

      Backyard Contest
    • Silly Hats Speed Challenge

      Silly Hats Speed Challenge
    • Finish It Already Speed Challenge

      Finish It Already Speed Challenge

    2 Discussions

    my advice is don't. strip out the capacitor first then just shock with the charging wires, same volts but lower amps. if intending to use it for anything a case around it so you don't inadvertently touch the HV parts is helpful.
    had to post again as a missing comma made this into something totally different...