How to Use the Emerson Action Cam HD Video

Introduction: How to Use the Emerson Action Cam HD Video

Hey guys, I will be showing you how to use the Emerson action cam.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: How to Open the Water Proof Case.

First, pt your finger under the clip. Then pull it up to make the front clip loos from the long protruding line. And then open it.

Step 2: How to Turn It On

Hold on the power button until you see on the screen the name emerson. Then release.

Step 3: How to Take a Video/ Photo

When you turn it on, you will see on the top left corner a picture of video symbol. That means it is on video mode. To take a video, click on the button on top with the picture of a camera to take the video. To stop, click it again. To take a picture, click on the power button ones. Then u will c on the top left corner a camera symbol. That mean you can take a picture. Then press on the top button with the camera symbol to take that picture.

Step 4: How to Change It to See Ur Photos/videos That You Took

First, make sure on the top left corner it is the picture of a camera. Then click on the power button one more time to see all the videos/ photos you've taken. On the side of the camera, u can use the up and down arrows to scroll through ur photos/ videos. Then click on menu to delete one or all ur pics.

Step 5: How to Close the Waterproof Case

Follow the images above, too hard too explained with all the action detail. Tnx for cooperating. lol! :p

Step 6: How to Charge It

First, open the waterproof case. Then get the USB charger that it comes with in the box. Then plug ur Emerson action camera to ur computer too charge it. When it is fully charged, open ur camera. Turn it on. Then look at the bottom left corner to see if you charged it fully.

Step 7: Bye Guys!!! Follow, Comment, and Favorite.

Be the First to Share

    Recommendations

    • Finish It Already Speed Challenge

      Finish It Already Speed Challenge
    • Arduino Contest 2020

      Arduino Contest 2020
    • First Time Author Contest

      First Time Author Contest

    13 Discussions

    0
    carlwalker923
    carlwalker923

    Question 5 months ago on Introduction

    i cant get mine to turn on all i get is a blue lite saying its on with no lite on the screen

    0
    definitiview1
    definitiview1

    7 months ago on Step 7

    I'll delete the editing advice soon. Not trying to be a jerk, thanks for the information.

    0
    definitiview1
    definitiview1

    7 months ago on Step 1

    Hello, I just noticed an editing miss. The first line here should most likely have put, rather than pt. There's a couple I noticed, and I'll point them out in each step. No offense intended, I just assumed you would want to know.

    0
    BrandonB259
    BrandonB259

    Question 2 years ago on Introduction

    How do I upload it's content to my laptop? For some reason nothing pops up on my screen when I plug it in..

    Help! I have the SD card in, charged the camera, but it will not stay on...what are we doing wrong?

    0
    Johnj53
    Johnj53

    Reply 4 years ago on Introduction

    These cameras had problems with the batteries. Im sure you returned it by now.

    Ive replaced the batteries in a bunch of them.

    0
    DrewL5
    DrewL5

    Reply 4 years ago

    What specs are the batteries? Mine are bulging and need replacement.

    0
    Coco5347
    Coco5347

    4 years ago

    I have a problem I don't know ups to set up the sd card

    0
    HernánF1
    HernánF1

    4 years ago on Step 2

    Hi, I have a problema with a Emerson Action Cam. It is configured to Film in HD, but when I check what it has captured, what it has filmed, is seems like it moves like waves. Any clues? Thanks in advance!

    0
    Rabbits R us
    Rabbits R us

    5 years ago

    Thanks, should I make a YouTube account?