How to Build a Plant Holder

89

1

1

Me and my friend J’onn decided to build a plant holder with only a drill, and if you stay with us, you will know how to also.

Step 1: Get Tools and Materials

What you need is:

Scrap Wood

Screws

Drill bits

Drill

Hammer

Step 2: The Backboard

Okay guys, just to clear it up, your scraps of wood can be whatever length you want. Some of our wood pieces weren't even flush with one another.

First of all, you take wood pieces 1-5 and arrange them how you see in the second picture.

Next take wood piece 6 and place it on wood 1-5 as you see in the third picture.

Then screw in the screws as you see in pictures 4-6.

Then flip this over and take wood piece 7 and lay this across the back, and finally, screw it in, as in picture 7.

Step 3: The Holding Part

First you take wood piece 8 and place it as you see in picture 2.

Then, screw it in as you see in picture 3 (you can screw in as much screws as you want, but for the sake of speed, I only did 2).

Then, you add pieces 10 and 11 like so in the fourth picture and screw them in (fifth picture).

Finally you add wood 9 (picture 6) and screw it in (picture 7).

Step 4: Finishing Up

Congratulations! You have completed your plant box! Now, you can sand it or stain it if you want. We didn't do either so don't feel obligated. Here is our finished product.

Gardening Contest

Participated in the
Gardening Contest

Share

    Recommendations

    • 1 Hour Challenge

      1 Hour Challenge
    • Sensors Contest

      Sensors Contest
    • Backyard Contest

      Backyard Contest

    Discussions

    0
    None
    Dominicfaagau

    21 days ago

    Cool idea...making it all out of scraps, but does it work? Have you used it yet?