Here I'm going to show how to know is your Seven Segment is fully functional.
Parts that you will need:
- Seven Segment -in this case Anode
- 11 jumper wires
- 1 breadboard
- arduino uno
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: How It Should Be Connected
In the photo your going to see what pins you should connect and the most importan pin is 3 and 8 from the 7 segment connect both to VCC in this case the 5V pin on the arduino
Step 2: Code...
Read the comments to know how the code works.