How to Construct the Letters "E" and "M" Out of PVC


*all pipes are .5" in diameter*

For PVC letter "E"

2x 90 degree connectors 
1x Tee connector

2x 9.5" pipes
1x 8.5" pipes
2x 6" pipes

*left picture is letter "M", right picture is letter "E"*

For PVC letter "M"

3x 90 degree connectors

2x 6" pipes
2x 3" pipes

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: For Constructing Letter "E": Step 1

Insert one of the 2 90 degree connectors into one of the 9.5" pipes.

Step 2: Step 2

Insert one of the 6" pipes into the open outlet of the 90 degree connector.

Step 3: Step 3

Connect the Tee connector into the 6" pipe used to connect the first 90 degree connector.

Step 4: Step 4

Insert the 8.5" pipe into the top outlet of the Tee connector  

Step 5: Step 5

Connect the other 6" pipe into the open end of the Tee connector.

Step 6: Step 6

Connect the last 90 degree connector to the end of the 6" pipe and to the last 9.5" pipe.

Step 7: Constructing the Letter "M": Step 1

Insert one of the 90 degree connectors into a 6" pipe

Step 8: Step 2

Insert both 3" pipes into a 90 degree connector. Then insert one of the 3" pipes into the open end of the first 90 degree connector used.

Step 9: Step 3

Insert the last 90 degree connector into the end of the 3" pipe and connect the other open end of the connector to the last 6" pipe.

Be the First to Share


    • CNC Contest

      CNC Contest
    • Make it Move

      Make it Move
    • Teacher Contest

      Teacher Contest



    5 years ago

    Awesome. Now what do you use them for?