Intro: How to Fix a Warped Skateboard
When you are not using your board, keep it stored in a controlled environment whenever possible. Try not to leave your board for extended periods of time in places that can be subject to extreme heat or cold, like your garage or the trunk of your car - and always keep your board dry! This will help control the moisture content of the wood and prevent unnecessary expansion and contraction of the veneers.
Now, we know that's not always possible... sometimes you just gotta take your board out in the rain and get your greezy slides on, or throw it in a jammed trunk for a long road trip. Either way, if you find yourself with a warped deck, we've got a relatively easy DIY solution to try and fix it.
STEP 1: Tools & Materials
- heat gun or hairdryer
- solid length of material (to be used as a lever)
- weighted object (e.g. Gallon of glue, brick, etc.)
STEP 2: Determine Where the Warp Starts
STEP 3: Warm Affected Areas
STEP 4: Counter the Warp With Heat & Weight
*Note* This is the part that will really take some practice. There are many different combinations of where to clamp the board, and where to place the weight that can affect how your board bends. Some bends may require more weight to counteract the warping, and the type of wood, length of your board and type of glue used by the manufacturer may affect the results as well.
Once your board looks like it is in a stable and straight position, leave it clamped and weighted for at least a few hours to let the glue reset. When you are ready to check on your board, make note of where the clamps and weight were positioned in case you need to tweak the setup and try again.
Using this method will give you a basic understanding of how to counteract the warping effect. It's cheap, simple and can be very effective. It may not work perfectly everytime, but if you can save even just one board being chopped from rotation...isn't it worth it?!