How to Make Auto Water Planting

Hey guys! Today we will going to show you how to make Auto water planting that is cost friendly. This project operate according to the timer we set. When it reach it preset time, the water will flow out and stop when the water detector sense enough humidity. It will water the plant back when it reach the next set timer.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Gather Your Things Up!

All you need in this project is:

1. DC12V 370 WATER PUMP https://www.mybotic.com.my/webshaper/store/viewPr...

2.MB-18 RAIN AND WATER SENSOR KIT https://www.mybotic.com.my/webshaper/store/viewPr...

3. 13A TIMER https://www.mybotic.com.my/webshaper/store/viewPr...

4. DC JACK (FEMALE) https://www.mybotic.com.my/webshaper/store/viewPr...

5. WATER PUMP PIPE 3*5MM https://www.mybotic.com.my/webshaper/store/viewPr...

6. DC 6V 2A ADAPTER https://www.mybotic.com.my/webshaper/store/viewPr...

All other item we use other than above is just recyclable items. You can use anything suitable item for the project.

Follow the circuit diagram that we show in the image to make sure this auto water planting will work like it should in the introduction.

Step 2: Let's Do This!

Be the First to Share

    Recommendations

    • Made with Math Contest

      Made with Math Contest
    • Multi-Discipline Contest

      Multi-Discipline Contest
    • Robotics Contest

      Robotics Contest

    Discussions