About: I am a textile chemist. And i love to to do experiment on textiles using various dyeing and printing technique.
More About rbhurtel1 »
This project is very interesting one. Soap case is one of the important items of our daily life. A soap case that is very light, does not break and keep soap fresh even it drops in water. isn't it very interesting? Let's make it.
Teachers! Did you use this instructable in your classroom? Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Watch the Video
First watch the video carefully.
Step 2: Arrange These Stuffs
Small sponge or foam, scissors, blade, brush, plastic soap case, glue
Step 3: Use Sharp Blade to Take Out Sponge
Place the soap case die on sponge make an outline.
Step 4: Make Outline Using Blade.
Step 5: Take Out the Rough Shape
Step 6: Rough Shape
Step 7: Use Scissor to Make It Fine.
Step 8: The Final Result
Step 9: Cut the PVC Pipe.
Step 10: Use a Hot Air Gun to Shape It Like a Oval Shape
Step 11: Shape
Step 12: Place It Over the Sponge and Cut a Thin Layer
Step 13: Apply the Adhesive in the Inner Part of the PVC and Paste That Thin Sponge.