How to Make ''El Presidente''

This game consist in arrive to the last box where the president is, you have to arrive whith one object

(key,constitution and crown).

Materials:

·Box

·Yellow paint

·Permanent Marker (blue, red and black)

·Electrical circuit

·Yellow and red cardboard

Step 1: CUT a SIDE OF THE BOX AND PAINT IT

First, cut one of the sides of the box. Then paint it with yellow paint.

Step 2: DRAW THE BOXES AND THE SIMBLES OF THE SPECIAL BOXES

When the paint is dry , draw 54 boxes of 3cm x 5cm with a pencil and then highlight them with the permanent marker. Then draw the simbles A (abogado), M (minijuego), J (juez), L (ley) and the boxes that make you move back and move forward. And here you have the board.

Step 3: MAKE THE COUNTERS AND THE ELECTRICAL CIRCUIT

When the board is finished, cut pieces of different shapes of cardboard. And then paint them with different colors.Then make the electrical circuit and put the ligth bulb in the box of the president.

Step 4: Make the Cards.

There are two types of cards:

"Minijuegos" and "Abogado"

cut 15 squares pices of yellow cutboard and put "Abogado"

cut 14 squares pices of red cutboard and write in one side "MN" and in the other side write one game it can be:

"Piedra papel o tijera","Tres en raya","Pistolero","Calientamanos" ,"Deditos","Pulso","Dados". And then make the cards of the prices that could be the Constitution the keys and the crown.

Share

    Recommendations

    • Make it Glow Contest 2018

      Make it Glow Contest 2018
    • Optics Contest

      Optics Contest
    • Puzzle Challenge

      Puzzle Challenge

    Discussions