Introduction: How to Make Pan Pipes
2 ft. of 1/2" 40 schedule sprinkler PVC
Sharp Hand Saw (at the very least)
Electrical Tape (optional)
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Step 1
Cut the PVC pipe in the following lengths (corresponding notes)
6 1/16" (C)
5 3/8" (D)
4 3/4" (E)
3 15/16" (G)
3 7/16" (A)
(Electrical tape cover is optional)
Step 2: Step 2
Using the duct tape, seal the 5 pennies over one of the ends of the 5 sections.
Step 3: Step 3
After making sure the tops of the sections are flush with each other, wrap duct tape tightly around the sections a few times. To get the best sound, blow forcefully directly in the top of the pipes.