It is easy to make paper skateboard or finger board which is played by fingers. Why you doing this you must be attention so that it would be better toy.
any type of gum
bead or toy tyres or any other
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Cutting Paper
Take scissors and cut paper in required size.
Step 2: Folding
Fold paper as shown in the picture
Step 3: Folding Edges
Fold edges of the fold paper.
Step 4: Apply Gum and Pressing
Apply any type of gum to foldings of paper and press gently with fingers or scissors.
Step 5: Selecting and Cutting Ear Buds
Select one ear birds and cut two pieces from it as shown in the picture.
Step 6: Applying Lubricants to the Pieces of Earbuds and Grass Stick
Pencil lead is graphite which is a good dry lubricant so so apply graphite to the pieces of earbuds and grass sticks as shown in the picture.
Step 7: Cutting the Edges (optional)
Cut the edges of the paper so that it would be good to see. It is optional.
Step 8: Selecting Grass Stick and Cutting
Select one grass stick and cut equal to the width of paper skateboard .
Step 9: Selecting Tyre and Applying
Select beads or toy tyres or any other and insert grass sticks as shown in the picture.
Step 10: Marking on Skateboard
Take pencil and mark back side of the skateboard as shown in the picture.
Step 11: Applying Gum
Take anything and apply on the marked part of the backside skateboard and take ear buds pieces and attach to the gum portion backside of the skateboard.
Step 12: Assembling the Paper Skateboard
Take the tyres an insert as shown in the picture.
Step 14: Colouring (optional)
Colour as you like it will be colourful.
Step 15: Thank You
Now you are paper skateboard is ready you can play a and comment me about this and tell me how is it and be careful while making it so it will be better to play.
This is an entry in the