It is very clear from the title what we are about to make. So without any delay, let's begin.
We have made a video tutorial about this project. If you want to know the simple theory behind the coding, then do watch the following video. If you like our work, then please like our video and do subscribe our channel.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Gather the Componenets
Things we will need for this project:
- Arduino Uno
- 16X2 LCD screen
- 2 resistors of 1k and 100E
- 1k Potentiometer
Step 2: Make the Circuit
Follow the circuit diagram and make the following circuit. It's very easy.
Step 3: Upload the Code
Upload the following code into your Arduino.
Step 4: It's Done!
Let's wrap this up. Just plug in the battery or any voltage source to measure and you can see the voltage written on the LCD screen.
I hope you have enjoyed it. Leave a thumbs up in the video. SUBSCRIBE to our channel.
We are Being Engineers. Peace. :)