How to Make This Cement Vase | Antique Vase | DIY

Introduction: How to Make This Cement Vase | Antique Vase | DIY

Welcome to my new video .Its beautiful antique cement vase /DIY. You may grow fresh plants in it after few changes.You have to add powder color in cement than apply it on balloon. Make small hole in bottom,now its better for plants. You may hang it on wall.

Feel free to ask any question about it.

Your suggestions are always welcome.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: Vase Making

I take a balloon mark circle on top of balloon .Now make mixture of PVA glue and water .Cover lower part of balloon with mixture of glue and tissue paper,leave for drying. Now apply plaster of paris or white cement to cover it, again leave for drying. Take out balloon from it.Apply another layer of plaster of paris or cement. For smooth surface I used sand paper of 220,400,1000,1500 and 2000 grit.

Step 2: Designing

For design I used thin layer of plaster or cement on top portion ,For detailing Use Hobby knife .For more detail watch the video.

Step 3: Coloring

I used dark brown color ,apply on whole vase.After drying little orange color apply on vase with the help of sponge.Project is done.

Step 4: Beautiful Pics

Here are few final beautiful pics of my vase.

Be the First to Share

    Recommendations

    • Magnets Challenge

      Magnets Challenge
    • Warm and Fuzzy Challenge

      Warm and Fuzzy Challenge
    • Wearables Contest

      Wearables Contest

    Discussions