Introduction: How to Make Vacuum Cleaner With Motor - Easy Tutorials

About: Welcome to my Channel Tiktak Tricks Where You will learn how to make a car, electric motor boat, balloon tricks, how to use bottle to make something creative. More i will show you how to make hand craft, firec…

Hi guys, welcome to my new project : Vacuum Cleaner. In this article, I will show you How to Make Vacuum Cleaner With Motor.

If you want a more visual instruction please click to this below instructional video.


If you like, SUBSCRIBE my Youtube channel ☞☞☞ HERE ☜☜☜. I always update my new projects everyday.

Step 1: Tools Need

1. DC Motor

2. Two Plastic Bottle

3. Glue Gun

4. Fan

5. Battery

6. Switch

7. Soldering iron

Step 2: Cut Bottle in Middle Part

First of all Cut one plastic Bottle in middle part as like picture using knife.

Step 3: Make Some Hole With Soldering Iron

Now Make some hole in bottle part of the plastic bottle with soldering iron. see the picture.

Step 4: Cut Bottle Caps One Side and Add With Motor and Fan

Then cut bottle caps one side and add with dc motor including fan. See the picture.

Step 5: Attached DC Motor Inside the Bottle

Then Attached DC Motor Inside the bottle bottle part using glue gun, see the picture.

Step 6: Join All the Cable

Then Join all the cable ( Dc motor , switch and battery ). See the picture

Step 7: Cut Another Plastic Bottle

Then Cut another plastic bottle and attached with two bottle as like picture .

Step 8: Attached a Card Board Into Plastic Bottle

Then attached a card board into plastic bottle with glue gun . See the picture .

Step 9: Attached a Piece of Net

Then attached a piece of net with a card board . See the picture .

Step 10: Attached Switch and Battery

Then attached switch and battery with plastic bottle using glue gun . See the picture .

Step 11: Attached Handle With Plastic Bottle

Then attached handle with plastic bottle . Here I am using pop stick for the handle , you can use any foam . See the picture .

Step 12: Attached Top Part Plastic Bottle , Battery and Switch

Then attached top part plastic bottle , battery and switch . See the picture .

Step 13: Finishing Part

Now your vacuum cleaner is ready , you can use it and enjoy yourself .

I hope you like this article. If you confuse any of the steps you can watch full video into my video here:

Thank you for reading my instruction and watching my video.
See you in the next project. Click Here To Subscribe My YouTube Channel for more Video.