How to Make a Wooden RoadSign

About: I'm a young french woodworker. I learnt everything by myself thanks to internet. I have lots of videos on my Youtube channel. Just click the link below to check it out. You can also visit my WebSite for more...

I needed to do that, people park their car just in front of my garage, that's not fair :D

I invite you to watch my video to understand better how I made it. Nothing complicated.

If you liked it, don't forget to put the thumb up and to subscribe to my Youtube channel. I'll appreciate it.

Thanks for watching.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: What You Need to Make Your Own

- a piece of scrap wood

- handplane

- a rasp or a spokeshave

- a handsaw or a bandsaw

- masking tape

- a cutter

- paint spray

- a roadsign pattern

Step 2: Video About How I Made It

First of all I took a piece of scrap out of pin. I hand saw it until the right thickness. After that I handplaned it to make it flat. Then I used a rasp to round it approximatelly.

I sanded it, and put a coat of woodsealer. Then I paint everything red with a spray paint.

Next, I covered everything with my masking tape and then I glued my pattern and cut it with a cutter.

and to finish I sprayed it whith white paint and I put 2 coats of varnish.

Be the First to Share

    Recommendations

    • CNC Contest

      CNC Contest
    • Make it Move

      Make it Move
    • Teacher Contest

      Teacher Contest

    Discussions