This project will help increase biodiversity
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Step 1
Collect the materials (Wood, Door Hinges, wood glue, nails and other tools)
Step 2: Step 2
Draw measurements on wood. Walls will be 7x8. The base will be 7x8 and ceiling will be 7x7.Cut out the pieces with a saw.
Step 3: Step 3
Cut out the pieces with the saw.
Step 4: Step 4
Nail the bottom of the wall to the side of the base. Nail four for each side. Repeat for all walls. (Note: A small piece of the base will stick out from the front. Leave it for the birds to stand/rest on)
Step 5: Step 5
Cut a hole that 2 ½in wide on a piece of wood. This will be the entrance. Screw the ceiling to the other side of the hinge.
Step 6: Step 6
Cut out two pieces of wood that are 2x2 in. Cut out a small hole on one side so that the hummingbird can eat seeds through it.
Step 7: Step 7
Use another hinge and screw it above the small box. Screw another piece of wood (same measurements) to the hinge.