How to Make a Bubble Machine With Little Bits

About: First year Mechatronics Engineering student. Imagination is more important than knowledge. #Tinkering

This is a bubble machine controlller by a push button, in this case we're using a 9V battery for power , a button for control the fan. This can use for kids tha like bubble.

Step 1: Materials for This Project

The materials are:

  1. 9V battery
  2. Power module
  3. Cable power
  4. Button module
  5. Cup or glass
  6. Normal tape and tape two faces
  7. Fan module
  8. Board
  9. Container

Step 2: Connect the Battery to the Cable

We proceed to connect the battery of 9V for power the circuit.

Step 3: Connect All the Modules

We proceed to connect the module power to turn on the circuit , then we connect the button module to turn on the fan , and finally the fan module.

Step 4: Mount the Circuit to the Mounting Board and Cutting the Cup

Once the board is mounted you can put ti on different ways of your choice, be creative!!!, then we cut the bottom of the cup, and finally put the fan on the cup and hold with tape.

Step 5: Mount the Circuit to the Mounting Board

Once the board is mounted you can put ti on different ways of your choice, be creative!!!

Step 6: The Moment to Proof

We recomend that u have to make a nice mix to create a greate bubble.

Share

    Recommendations

    • PCB Contest

      PCB Contest
    • First Time Author

      First Time Author
    • Toys Contest

      Toys Contest

    Discussions