Hi guys, welcome to my new project : Coca-Cola Truck. In this article, I will show you How to Make a Coca-Cola Truck with DC motor.
If you want a more visual instruction please click to this below instructional video.
If you like, SUBSCRIBE my Youtube channel ☞☞☞ HERE ☜☜☜. I always update my new projects everyday.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Tools Need
1. DC Motor
2. Two Coca Cola Can
4. Bottle Caps
5. Glue Gun
Step 2: Attached Pinium
First of all you need to attached pinium with a sticks and straw and attached with cardboard. See the picture.
Step 3: ADD Wheel With Sticks
Add two wheel with sticks using glue gun.
Step 4: Add DC Motor With Pinium
Now add dc motor with pinium using glue gun.
Step 5: Add Another Wheel
Now make another wheel and add it to coca cola can as like picture.
Step 6: Make a Truck Head Part
Then make a truck head part with cardboard and glue gun and attached it to truck.
Step 7: Now Add Coca Cola Can With Truck
Now add coca cola can with truck with glue gun.
Step 8: Add Another Wheel With Another Can
Then Add another wheel with another can and add it to back side of the truck using glue gun.
Step 9: Add Battery Back Side of the Coca Cola Can.
Now Add battery back side of the coca cola can using glue gun.
Step 10: Your Truck Is Ready to Run
Now your truck is ready to run and enjoy it.
I hope you like this article. If you confuse any of the steps you can watch full video into my video here:
Thank you for reading my instruction and watching my video.See you in the next project. Click Here To Subscribe My YouTube Channel for more Video.