How to Make a Electric Car - Simple
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Tools You Need to Make This Simple Electric Speed Car
- DC Motor
- Tiffin Box
- Glue Gun
- Soldering iron
- Plastic Bottle Caps
- Black Tape
Step 2: Hole Bottle Caps
Now hole plastic bottle caps in the middle with Soldering iron.
Step 3: Take a Straw and Bottle Caps
Now take a straw and bottle caps and sticks.
Step 4: Make a Wheel With Bottle Caps
Now make a wheel with bottle caps straw and sticks as like picture.
Step 5: Make Another Wheel
Now make another wheel with bottle caps, stick and must place the pinium as like picture.
Step 6: Now Add Straw in the 2nd Wheel
Now add straw in 2nd wheel where you use pinium and straw must cut in the middle and add it withe the wheel. See the picture.
Step 7: Add Battery With Wheel
Now add battery with 1st wheel using glue gun.
Step 8: Add DC Motor With Battery
In this Stage now you need to add DC Motor with Battery using glue gun. See the picture
Step 9: Take Sticks
Now take sticks and divided it 2 part
Step 10: Add DC Motor and 2nd Wheel
Now add dc motor and 2nd wheel using black tape. See the picture.
Step 11: Add 2 Sticks
Now add 2 sticks 2 side of the car with 2 wheel using glue gun as like the picture
Step 12: Take Any Tiffin Box or What Ever You Want to Place It
Now take any Tiffin box or any thing u want to pace it top side of the car.
Step 13: Add a Small Foam
Now add a small foam top of the car using glue gun.
Step 14: Now Add Your Car With the Tiffin Box
Now add your car with tiffing box at the top of the car using glue gun. see the picture.
Step 15: Connect DC Motor and Battery
Now Connect DC Motor and Battery to run your car.
Step 16: Finally Your Car Is Ready to Run
Now run your car and enjoy yourself.
Like and Share this with your friend and enjoy it.
If you didn't understand any of the stage, Plz check my full video tutorial.