How to Make a Simple Mobile Phone Detector | Cell Phone Detector | Simple Project | DIY

PCB Prototype for $2 (Any Color):
►► https://jlcpcb.com/m

This video tutorial is SPONSORED by JLC PCB's They are providing a quality PCB's for Under 2$ Only First register from the link below & Upload your Gerber file / Eagle design That's it....

►►https://jlcpcb.com/m

#CircuitsDIY

Today in this video tutorial i am going to show you Step by Step

How to make a cell phone call detector circuit using ic 3130a

You Will Find Full Project Description & All Useful Material Including

• Circuit Diagram / Schematic • Hardware / Component List • Codes / Algorithm • Datasheet • Pin Configuration Etc

AT ► https://circuits-diy.com/how-to-make-a-simple-mobile-phone-detector-cell-phone-detector-simple-project-diy/

Thanks for Watching It.

↪ For Any Difficulty Please Comment Below

Please Subscribe / Like Facebook Page

►► https://www.youtube.com/channel/UCi6ZqREHDIx2xLrCRkrRS0w

►► https://www.facebook.com/Circuit-DIY-122206971927665

Supplies:

Step 1: Hardware Required


  • ► Mobile Call Detector PCB
  • ► CA3130 IC with Base
  • ► 100uf Electrolytic Capacitor
  • ► 47pf Ceramic Capacitor
  • ► 0.22uf Ceramic Capacitor
  • ► BC458 NPN Transistor
  • ► LED
  • ► 1K Resistor
  • ► 100K Resistor
  • ► 2.2M Resistor 2x
  • ► 9V Battery
  • ► Battery Clip

Step 2: Steps

Follow All Steps Carefully from the Video Tutorial Above (Recommended)

  • ► Solder IC Base CA3130 Place in it
  • ► Solder All Capacitor C1 C2 C3
  • ► Solder All Resistors R1 R2 R3
  • ► Solder BC548 Transistor
  • ► Solder Output LED and Input Power Connector 9v
  • ► Let's Test it

Step 3: Circuit Diagram

Share

    Recommendations

    • Woodworking Contest

      Woodworking Contest
    • IoT Challenge

      IoT Challenge
    • Gardening Contest

      Gardening Contest

    Discussions