Introduction: How to Make a Simple Photo Frame
Today, I'm going to teach you how to make a simple, but really nice looking Photo Frame.
It's really fun to do and it will only take you 1 day to finish it.
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Calculate the Measurements
Know the measure you want to do, and the measure the length of the photo you want to put in the frame. I took the measures. I took the measures of; Length 20 cm and Width 20cm in the frame, since I want a big picture, next I'll show you the measurements of the glass.
Step 2: Glass Length
For this step, you'll will need a lot of caution, since it's glass and you will cut it in the measurement you want. I did a cut that measured: Length 20 cm Width 20 cm. Cutting the glass sometimes is hard, so be patient in this simple step.
Step 3: Putting All Together
Here is the final Step, I cut the wood as I wanted, the glass was hard to cut, but you need to be patient with it. The best part is when you need paint the wood, I used black paint. Now you can put this really good looking frame in your office, or even your living room.