This video will show you step by step instructions on how to reset your oil life indicator on a Jeep Commander 2006-2010.
If you liked this video and found it helpful feel free to like, share, and comment to help us bring even better content.
For more oil reset and DIY maintenance, make sure to subscribe to our channel! For any question or suggestion, post a comment below or send us an email to: firstname.lastname@example.org
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
1-Turn the ignition to RUN (second position).
2-Press the accelerator pedal all the way down slowly three times within 10 seconds.
3-Turn ignition OFF then turn ignition to RUN again to verify the maintenance has been reset.