How to Start a Car With a Flat Battery With a Jump Pack

Introduction: How to Start a Car With a Flat Battery With a Jump Pack

How to jump start a car

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1:

Pop the bonnet lever in the car, normally located half way down between the foot pedals and steering wheel.

Step 2:

Lift the bonnet up and put the safety arm in place to hold the bonnet open.

Step 3:

Get the battery jump pack, put the red positive lead on to the red battery terminal on the battery. then put the black negative lead on to the negative terminal.

Step 4:

Turn the battery jump pack on, hop into the car and start like normal

Step 5:

Hop back out of the car, take the positive lead off first then the black. Turn off battery jump pack. take out the safety arm and close the bonnet down

That's how you start a car with a flat battery

Be the First to Share

    Recommendations

    • Backyard Contest

      Backyard Contest
    • Silly Hats Speed Challenge

      Silly Hats Speed Challenge
    • Finish It Already Speed Challenge

      Finish It Already Speed Challenge

    Discussions

    0
    Penolopy Bulnick
    Penolopy Bulnick

    1 year ago

    That battery jump pack seems like a handy thing to have around!